Deals of The Day
Goot Wick CP-2015 Desoldering wick width 2.0mm Length 1.5mm
* Our thin and soft desoldering wire flat braid has efficient thermal transmission.
* Removes solder faster with better heat response than previous wicks.
* Recommended for lead-free solder with high heating load.
* RMA base flux. High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux.
* Can be used for precision PCBs safely
2UUL WL-2015 Double Side Strong Desoldering Wick
* Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick.
* The solder will be absorbed. Remove the desoldering wick after the solder has been absorbed.
* Cut off the used section of the wick using nippers.
* Our thin and soft desoldering wire flat braid has efficient thermal transmission.
* Removes solder faster with better heat response than previous wicks.
* Recommended for lead-free solder with the high heating load.
* RMA base flux. High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux.
* Can be used for precision PCBs safely.
Relife RL-2015 Desolder Wire
2UUL DW01 Mobi Desoldering Wick 2015 5Rolls/Box
* Width: 2.0mm
* Length: 1.5m
* Adopting professional and premium grade copper wick.
* It is anti-oxidation and has good performance in desoldering.
* Featuring anti-oxidation stability and anti-corrosion ability
* With perfect and thorough desoldering effect.
MLC-500 High Precision Auto Ranging Lc Meter Professional Capacitance Inductance Table 500 Khz Capacitance Meter Multimeter
MLC-500 High Precision Auto Ranging Lc Meter Professional Capacitance Inductance Table 500 Khz Capacitance Meter Multimeter
V1S Pro Programmer Nand Read and Write Purple Screen Repair for iPhone 6-14PM- JCID
V1S Pro Programmer Nand Read and Write Purple Screen Repair for iPhone 6-14PM- JCID
JCID V1S Pro programmer is a powerful and comprehensive tool for mobile phone repair. It integrates all functions of JCID V1SE, PRO1000S and P13, suitable for different repair scenarios. Zero fault on the kernel data read and write as well as factory code checking, unbind WiFi in 1 second. 6 core and 64 bit dual operation system, powerful inner core brings smoother operation. It supports BGA60, BGA70, BGA110 and BGA315 Nand flash and accessories unbind, support functions including mobile phone restore and inspect, mobile purple screen without dismantle, jailbreak, mobile faults detection, 12-13 rear camera read and write, one key unbind, large camera replacement, screen display and touch test of Android and iPhone full series. It’s a must have programmer especially for mobile repair shop.
Infinity CM2 Dongle
Software for GSM and CDMA models, see list of supported models World-famous “Chinese Miracle” software for MTK / MediaTek, etc. World-famous “Chinese Miracle-2” software for MTK / MediaTek, SPD / Spreadtrum, RDA / Coolsand, etc. Protection Smart-Card USB Smart-Card reader Support area access (software, flash files, drivers, manuals, updates, bug-fixes, etc.) Smart-Card upgrade server access Support via e-mail Support forum access.
2UUL Sexy Blade 4in1
The packing list includes 4 pieces of knife and 1 knife handle
* Model S: Separate the CPU and Nand flash
* Model E: Mobile phone motherboard IC CPU glue removal
* Model X: Professional edge glue removal tool
* Model Y: Cut the underfill black glue without hurting the motherboard.
Popular Categories this Week
-
Mobile Repair Tools, Wire & Tape
Goot Wick CP-2015 Desoldering wick width 2.0mm Length 1.5mm
* Our thin and soft desoldering wire flat braid has efficient thermal transmission.
* Removes solder faster with better heat response than previous wicks.
* Recommended for lead-free solder with high heating load.
* RMA base flux. High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux.
* Can be used for precision PCBs safelySKU: CP-2015 -
2UUL, Mobile Repair Tools, Wire & Tape
2UUL WL-2015 Double Side Strong Desoldering Wick
* Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick.
* The solder will be absorbed. Remove the desoldering wick after the solder has been absorbed.
* Cut off the used section of the wick using nippers.
* Our thin and soft desoldering wire flat braid has efficient thermal transmission.
* Removes solder faster with better heat response than previous wicks.
* Recommended for lead-free solder with the high heating load.
* RMA base flux. High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux.
* Can be used for precision PCBs safely.SKU: WL2015
Headphones
-
Mobile Repair Tools, Wire & Tape
Goot Wick CP-2015 Desoldering wick width 2.0mm Length 1.5mm
* Our thin and soft desoldering wire flat braid has efficient thermal transmission.
* Removes solder faster with better heat response than previous wicks.
* Recommended for lead-free solder with high heating load.
* RMA base flux. High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux.
* Can be used for precision PCBs safelySKU: CP-2015
Smartphones & Tablets
Recommendation For You
View All Recommendations-
Mobile Repair Tools, Wire & Tape
Goot Wick CP-2015 Desoldering wick width 2.0mm Length 1.5mm
* Our thin and soft desoldering wire flat braid has efficient thermal transmission.
* Removes solder faster with better heat response than previous wicks.
* Recommended for lead-free solder with high heating load.
* RMA base flux. High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux.
* Can be used for precision PCBs safelySKU: CP-2015 -
2UUL, Mobile Repair Tools, Wire & Tape
2UUL WL-2015 Double Side Strong Desoldering Wick
* Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick.
* The solder will be absorbed. Remove the desoldering wick after the solder has been absorbed.
* Cut off the used section of the wick using nippers.
* Our thin and soft desoldering wire flat braid has efficient thermal transmission.
* Removes solder faster with better heat response than previous wicks.
* Recommended for lead-free solder with the high heating load.
* RMA base flux. High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux.
* Can be used for precision PCBs safely.SKU: WL2015 -
Mobile Repair Tools, Relife, Wire & Tape
Relife RL-2015 Desolder Wire
- 1. Tin absorption line for the tin absorbing excess solder
- 2. Material: copper corer
- 3. Desoldering braid, made from copper wire, sturdy and practical
- 4. Fits various kinds of soldering iron
- 5. Solder wick braid removes solder from all types of connections
- 6. Length: 1.5M, Width: 2.0MM
SKU: RL2015 -
2UUL, Mobile Repair Tools, Wire & Tape
2UUL DW01 Mobi Desoldering Wick 2015 5Rolls/Box
* Width: 2.0mm
* Length: 1.5m
* Adopting professional and premium grade copper wick.
* It is anti-oxidation and has good performance in desoldering.
* Featuring anti-oxidation stability and anti-corrosion ability
* With perfect and thorough desoldering effect.SKU: DW01